Washing machines wash clothes three erroneous zone

         Take the clothes to dry cleaners or laundry washing (industrial washing machine) should be a lot of friends, but there are according to the survey, laundry washing equipment has become the top killer of skin health harm consumers, many professional doctor pointed out that some seemingly very healthy, very normal laundry method, often there is a huge health concern;So today in guangzhou ENEJEAN washing machinery manufacturing co. , LTD.  Small make up for the sake of our laundry dry cleaning staff a more professional, more scientific to wash clothes, just share with everyone working in the laundry staff about how to correctly use washing machines to wash clothes;

         Myth 1: all clothes washed together
         Many people like to put all of the clothes in the washing together, both garment, underwear and socks all throw into the washing equipment, knight will make clothing more dirty. Through the clothes will have bacterial growth, according to the survey, each square centimeter of area there are at least 100 microbes, which use detergent to clean, also can remove 80% of the bacteria, the hook of the bacteria can cause cross infection. Therefore, when soaking and washing the clothes, different clothes must wash separately.

         Myth 2: brightener for detergent
         Present a sparkling white after a lot of clothes in the washing, in fact this is the effect of whitening agent brightening agent is a kind of can absorb ultraviolet light chemical dyes, after enters the body, rather than being decomposed by the human body is combined with the protein in the body quickly, so it is difficult to eduction body outside, increased liver burden, and easily fluorescent agent on the skin is born. Some people think that clothes not only beautiful but also clean after whitening it is all a misunderstanding.

         Myth 3: washing the longer the better the results
         Washing the clothes, the longer is not equal to the cleaner the clothes some stubborn stains, passage of presoak to prewash and proper rub to remove. Washing time shoulds not be too long, otherwise not only didn't clean will also damage to the fiber clothes.
Don't look down upon these details, often, a lot of laundry staff is not pay attention to the small details leading to the customer's clothes without washing clean, no washing health. Thus will lead to your laundry bad rap, traffic loss.

Industrial washing machine is in use should be particularly matters needing attention

         Industrial washing machine is in use process should especially notice: we are in the use of industrial washing machine, often ignore the many details, but these seemingly insignificant details tend to affect the quality of industrial washing machine washing and service life, moreover may cause unnecessary injury. Therefore, we should especially pay attention to in the use of industrial washing machine process. What are the little detail overlooked? And to arrange below small make up learn together!
         (1) the ground safety problems. Industrial washing machine in the process of installation must not ignore the ground wire connection, because the washing equipment in the washing process is bound to use water and electricity, if the leakage situation, will cause harm to the person, but if to do a good job of ground wire, can very good avoid the happening of this kind of situation;
         (2) in the use of industrial washing machine, it is best not to overload. Each washing machine has its rated XiYiLiang, we will inevitably encounter in the process of washing clothes once more difficult to wash, in this case the two best washing, because too much washing can cause a certain loss of motor, but also difficult to ensure the quality of laundry;
         (3) the washing machine is consumables, will inevitably be used for a long time all kinds of small problems, in order to cut losses in the washing machine to a minimum, we'd better do the following maintenance regularly, in order to prolong the service life of washing equipment.
         (4) in the case of industrial washing machine is in normal operation, we must remember not to open the machine door casually or touch drum, so as not to pose a threat to personal safety;
         (5) at the time of use to shun industrial washing machine washing, don't place any items on the equipment, avoid items in the washing machine shake down unnecessary damage, but also reduce the damage for laundry equipment. 

Industrial washing machine how to rust cleaning treatment

         Washing machinery experts for you article summarizes several industrial washing machine rust prevention tips.
         1, industrial washing machine can't long-term exposure to sunshine point-blank, especially for plastic electrical device, in order to avoid fade, aging machine, this will shorten the service life of the machine.
         2, for industrial washing machine spindle is equipped with the oil hole, oil regularly, to prevent corrosion rust.
         3, should be laid industrial washing machine dry, no corrosive gas, no strong acid, strong alkali erosion, so as to avoid the rust of the metal, electrical components to reduce the insulation performance, ensure the machine after normal use.
         4, if the industrial washing machine is stopped for a long time, the first thing to rule out water, and cover with plastic film or cloth cover, avoid the erosion of dust, keep washing machine is light, clean and tidy, clean.

         Know how to industrial washing machine after rust prevention tips, then tell you how industrial washing machine cleaning time.
         1, for machine without serious rust where we first adopt the yarn paper rust polished clean, at the same time apply the same color or nearly color paint, this machine at the whole novel.
         2, serious rust of industrial washing machine is you need to contact the manufacturer in your after-sale service for processing, or contact the manufacturer directly purchase parts, or will be returned to the factory re-work, the whole machine and good after-sales service or the manufacturer consultation. 

Industrial laundry equipment in how to deal with noise?

         Industrial washing machine noise is too large will not only seriously interfere with the surrounding residents' normal life and work, for industrial laundry equipment itself, is extremely unfavorable. It will increase the load of industrial laundry equipment internal operation pressure, severely weakened the service life of industrial laundry equipment. Industrial laundry equipment appear noise caused by the improper operation are operators. ENEJEAN small make up, therefore, come to the conclusion that some prevent noise produced by the matters needing attention.

1.  Smooth industrial laundry equipment must be installed in place
2.  Industrial laundry equipment motor bearing or the shaft and bearing severe wear or fracture
3.  Industrial laundry equipment drive belt too tight
4.  The roller deformation and friction between outer barrel
5.  The shaft sealing ring too loose or too tight
6.  Damping suspension system out of balance

         In addition, we also can according to the industrial laundry equipment sound to determine how to solve the problem.
         If, industrial laundry equipment in the washing operation timing thrum boom boom. It is likely to be out mutual friction between roller and outer barrel or is caused by machines placed the ground not level off. When we adjust industrial laundry equipment center of gravity, smooth place can solve a problem;If the roller rotation cluck industrial laundry equipment, it is probably because driving wheel screw loosening, at this time, we can now remove the driving wheel, and then in the shaft bottom padded properly the thickness of the gasket, to eliminate the gap. To eliminate impact or friction of the two;If the issue were sound industrial laundry equipment belt driving, it is likely to be caused by the slack of drive belt. At this time, we can adjust the tension wheel tensioning belt. 

Washing equipment of large washing, the choice of horizontal well was made

Washing equipment is often the choice of many buyers the most confused thing, normally we open of the equipment is purchased laundry main industrial washing machines, industrial washing machine is also divided into horizontal, and vertical.General is semi-automatic horizontal, vertical is fully automatic washing.Many users do not know when buy should choose which kind of, the following ENEJEAN washing machinery manufacturing co., LTD. The technology of small make up to analyze the difference between two devices;

First, from the washing time
    Vertical automatic washing washing time: 1-2 hours.
    Horizontal type washing washing time: 40 minutes.
    If required washing time is short, it is suggested that the choose and buy of horizontal type washing brand.And after start-up pulsator still can add clothes without any difficulty.Now some of vertical automatic washing also has the function of midway and clothing but also is not very common.
    Second, from the provincial water ways to save power
    Horizontal type washing water, vertical automatic washing power consumption
    Vertical automatic washing washing power generally around 200 watts, if the water temperature to 60 degrees Celsius, the general clothes are washed once l00 minutes above, power consumption 1.5 degrees.
    Horizontal type washing offline generally around 400 watts of power to wash clothes the most need only 40 minutes, less than 0.5 KWH.On the water, vertical automatic washing is about 40% ~ 50% of horizontal type washing.

Third, from washing equipment XiJingDu ways
    If washed clean, it is suggested that the choose and buy of horizontal type washing.If use cold water, horizontal type function of elution washed clean, vertical automatic washing requires heating can wash clean.But sometimes some clothes a heat deformation.
Fourth, from the point of the wear of clothes
    Washing principle: vertical automatic washing offline simulation hand rub, XiJingDu uniform, low wear rate, clothes not easy winding;Horizontal type washing XiJingDu 10% higher than the vertical automatic washing, natural its wear rate is 10% higher than the vertical automatic washing.Consumers according to the different choice of different types of clothing material.Such as wool, silk clothing is more, it is suggested that the choose and buy of vertical automatic washing brand;Such as to wash cotton clothes to give priority to,   select horizontal type washing is recommended.
    Fifth, judging by the body size
    Vertical automatic washing with the principle of side door, when placed so can use the embedded design, more convenient;But as pulsator volume is small, many choose to wash off line into the toilet or the consumer of the balcony is more inclined to horizontal type washing.
    Through the above comparison of five factors, believe that each netizen in the purchase of washing equipment, all have a certain number.Needing those who remind everybody is here, no matter what you choose to buy what type of washing, will be on the premise of your personal needs and do not blindly pursue fashion or listen to introduce promoters.

Industrial washing machine cleaning disinfection should be every three months at a time

Heard of industrial washing machine with a long easy hiding dirt, bacteria grow in quantity, the more clothes to wash the dirty, at ordinary times what to clean industrial washing machine?Actually this question our guangzhou's resistance to clean laundry equipment co., LTD., the technology of small make up also have always been people who have to analyze, thus industrial washing machine daily cleaning disinfection work is really important
The net resistant industrial washing machine after-sales personnel, if often use industrial washing machine, it is not clear in time, there will be some dirty things in the industrial washing machine, time is long, if industrial washing machine in damp places for a long time, cause mould easily.So industrial washing machine should be regular cleaning and disinfection, in general industrial washing machine once every three months should do cleaning disinfection treatment.
There are two cleaners cleaning method.
The first method: use the industrial washing machine special cleaner.Add with good cleaning fluid into the industrial washing machine until the normal water level, open the normal washing mode cleaning for 20 minutes, soak two hours cleaning again after 30 minutes, can drain and dry.
The second method: add water to industrial washing machine is high water level, for two hours, then add the two bottles of hydrogen peroxide and a moderate amount of washing powder, according to the normal washing process to clean it again.
Have a point to understand is industrial washing machine can't split open a machine to clean, on the Internet to see a lot of household laundry equipment can be through the professional maintenance personnel to remove and clean the outside of the washing machine drum.But outside of industrial washing machine roller can't remove.