How do water-saving power-saving large washing equipment reduce costs

         Laundry staff in the use of washing equipment (isolation washing machines) will find laundry was in fact a very lengthy process, and often laundry in the laundry staff know actually laundry water and electricity is also a lot of overhead, and worsening environment, water saving electricity saving a virtue. Today small make up to you to introduce how to do washing equipment save electricity saving water to save time.

         Dirty clothes should be soaked.  The soil is more, some clothes after 20 minutes, can make the combination of soil dust and clothes loose, sink in the bottom.  At this time, the clothes out from the water, many soil dust sex dirt got sink with water, washing dirty clothes after soaking the available equipment rinse again.  This can save washing powder, also save water, save electricity, also less washing equipment wear and tear.

         Using low foam detergent.  Out of the washing powder has no necessary connection between how much bubble and washing ability, high quality low foam detergent has strong decontamination ability, and easy to rinse, generally less than high foaming detergent rinse 1-2 times, save water, save electricity, and time.

         When soaking, washing, rinsing, should separate light color clothes and dark clothing.  According to the order from shallow to deep.  This not only can avoid dark clothes stain the light color clothes, can also according to the degree of fouling choosing different washing time, convenient for power saving.

         First rinse generally not more than 2 minutes;A second rinse can be reduced to 1 minute and a half;1 minute.  Rinse three times and each time the clothing should be dry after rinsing, this reduces rinse times, also the service life of the washing equipment. 

Large water washing equipment fault phenomena analysis water level switch

         Water washing equipment (isolation washing machines) water level switch failure phenomenon of no water or water does not stop.

         Water washing equipment water level switch failure reason and repair method is as follows:
         1, the water level switch touch point contact point. Make water electromagnetic valve circuit impassability or circuit fault does not open, and so are not water or water more than large-scale water washing equipment. Maintenance and repair, a water level switch should be replaced.
         2, water level switch diaphragm is damaged. Lead to contact cannot move. To replace diaphragm or water level switch when repair.
         3, muffler has died. Air pressure can't transfer, water level switch will not move. Need to straighten the airway.
         4, returning the damaged windpipe, endotracheal air pressure along with the barrel of the water level change, not out of control. Need to change back into the trachea.
         5, seal joint leakage, switch does not work. Go to the glue stick, strengthening seal.
         6, there's a foreign body in trachea blocked storage. Need to clean up the air plug, ensure smooth gas path.

         Large water washing equipment, washing equipment leakage countermeasures
         1, if it is the main shaft seal failure, replace the seal ring.
         2, such as sealing ring into the sand, the line in the first class of sundry, dolly tub center site leakage, remove the foreign body in the sealing ring.
         3, such as pipes burst, with adhesive glue repair or replace a new drain pipe.
         4, such as drain connection is flabby, reinstall and strengthen seal.
         5, if it is at the bottom of the dolly tub welding crack, repair or replace the dolly tub.