The Honda TRX 400EX is
really a high-performance race quad having a 399-cc four-stroke liquid-cooled
engine. The trunk brakes are disc brakes and therefore are situated in the
heart of the trunk axle near the differential on the other side from the drive
chain. The trunk brakes about this ATV will be transformed exactly the same way
just like any other disc brakes. The bolt size around the caliper will change
between models, however the process would be the same for those honda trx brake
models.
Instructions
1.
Park the 400EX on flat ground inside a well-lit
area. Permit the brake rotor and caliper to totally awesome before proceeding.
2.
Take away the two bolts in the left and right
side from the caliper while using ratchet set. The bolts are facing the trunk
wheel in obvious view. Pull the caliper from the rotor.
3.
Pull the 2 brake pads in the caliper. Put the
ATV brake tool in to the caliper therefore the metal plate is on the other side
from the piston within the caliper. Make certain the push arm around the brake
tool is in the heart of the piston.
4.
Turn the knob around the
honda trx brake tool
clockwise before the piston needs in to the caliper's frame. Turn the knob
counterclockwise before the push arm folds up, after which take away the tool
in the caliper.
5.
Place the brand new brake pads in to the
caliper. Put the caliper to the rotor, and push lower before the mounting holes
fall into line. Place the acquiring bolts, and tighten them until they're snug.
A TRX 300 is really a
Honda all-terrain vehicle. The TRX can be used as any type of Honda ATV which
has a high output, high torque engine. The TRX models are often setup for
racing or durable focus on a farm or ranch. TRX models will also be setup for
fast repair and modification. The brakes on these models are disk-type brakes,
which are much more reliable than drum brakes. You'll need the tire tool for
the specific TRX model to be able to take away the wheels and access the brake
calipers.
没有评论:
发表评论